News

New campaign follows increase in Queensland bridge strikes by over-height vehicles

The Department of Transport and Main Roads (TMR) has launched its new ‘Truckload of Trouble’ campaign in response to an alarming number of road and rail bridge strikes across Queensland.

The campaign aims to increase driver awareness around the consequences of bridge strikes to themselves and others, encouraging drivers to know their load and vehicle height and provide practical solutions to plan their route and avoid low clearance bridges.

There has been a consistently high rate of bridge strikes over the last two years, with an average of one bridge or protection beam strike per day.

In the 2023/24 financial year, there were 369 rail bridge or protection beam strikes recorded with 360 the year before.

In 2023 alone, bridge strikes caused over 200 hours of rail delays.

A recent bridge strike at Allan Terrace in Corinda resulted in 103 train delays and 35 train cancellations.

TMR general manager land transport safety and regulation Joanna Robinson revealed, “The vision is shocking, we see over-height vehicles not only damaging infrastructure but losing their loads, becoming projectiles at risk of hitting other road users.

“Bridge strikes are dangerous. They’re dangerous for the driver of the over-height vehicle, they’re dangerous for train drivers and the passengers and they’re dangerous for other road users.

“Falling debris from the bridge can damage other people’s cars, or in worst case scenarios, serious injury, cause a road crash or kill someone.

“They also cause hundreds of hours of delays every year not only to the vehicle involved, but to rail customers, other road users and other truck drivers.”

The Truckload of Trouble campaign is a joint initiative between TMR, Queensland Rail and the Queensland Trucking Association in a fresh plea for drivers to know their height and plan their journey.

“The ‘Truckload of Trouble’ campaign messaging is critical for all truck drivers delivering in SEQ, bridge strikes are avoidable,” said Queensland Trucking Association CEO Gary Mahon.

He added that trucking companies, truck rental companies and businesses using trucks to deliver in and around the city have a responsibility to educate drivers.

“Awareness about truck and bridge heights should be included in pre-start check lists, toolbox talks and trip planning,” said Mahon. “Truck drivers who are newly licenced, new to driving around the city or hiring a truck, must be provided with information on bridge and truck heights to avoid these preventable incidents.

“For professional truck drivers, a bridge strike on your record is a black mark against you for future job opportunities. And there’s also embarrassment in having to tell your boss.”

TMR revealed that the most frequently struck bridges in the 2023/24 financial year were:

  • Logan Road, Buranda
  • North Street, Willowburn
  • Bergin Street, Booval
  • Oxley Road, Corinda
  • William Berry Drive / Visentin Road connection, Morayfield

Low clearance bridges are fitted with signage and many feature measures ranging from protection beams to height chimes.

Apart from causing serious risk to road users and delaying passenger trains, motorists who damage rail infrastructure can be fined from $1290 and four demerit points, to a $12,904 penalty if the matter goes to court. Queensland Rail actively pursues motorists for the cost of repairs which would otherwise be funded by taxpayers.

A driver who damages a bridge, tunnel or overhead structure may also be liable for other penalties such as contravening clearance signs ($645 fine and 4 demerit points) or $6452 if the matter goes to court, along with careless driving of a motor vehicle ($645 and 3 demerit points).

Road bridge strikes should be reported to 13 90 40. Rail bridge strikes should be reported to Queensland Rail using the telephone number on the identification plate fixed to the bridge or by calling Emergency Network Control on 1800 079 303.

1 Comment

  1. Every truck should be fitted with portable extendable measuring pole with a T piece that sits on top of the trailer then to slide the pole to the ground to take the measurement on both loaded and empty pantec’s.

Leave a Reply

Your email address will not be published. Required fields are marked *

Send this to a friend