Brendan Rowe – or ‘Jock’ as he prefers – could have chosen to stick to what he knows and keep life simple. However, by embracing the power of a brand new 770hp Scania V8 flagship, this traditional logger has proven he’s not afraid of change, and he has a lot to talk about.
With its unparalleled fuel economy, reduced trip times, and substantial operating savings, Jock says, “The Scania R 770 V8 is not just a truck – it’s a game-changer.”
The second-generation logger worked closely with Scania’s Tasmanian dealership, C & I Transport Repairs’ owner Leigh Curran, and Scania Account Manager Neil Wesley.
Their collective effort ensured the specifications of the new R 770 were well suited to the gruelling challenges of Tasmanian log haulage, delivering new efficiencies to increase profitability.
According to Jock, his decision to wait for a factory-built truck was indeed worthwhile because it hasn’t put a foot out of place since it arrived.
“Leigh and Neil were fastidious when it came to setting this truck up, particularly because it is the first Scania to enter Tasmanian logging in more than a decade.
“Their efforts and meticulous attention to detail are paying off because what’s initially impressed me is the exceptional fuel economy,” explained Jock.
“We’re getting 2.9 km/l (34.48-L/100 km), and it can only improve as the truck loosens up.”
The power output and incredible downhill retarding capability of the Scania R 770 have cut trip times by more than an hour compared to Jock’s older trucks.
“On a good day, the best fuel economy I could get out of my older trucks was 1.9 km/l (52.63-L/100 km), and they’d take 40 to 50 minutes longer to descend the mountain than the new Scania,” Jock revealed.
“The fuel savings I’m getting more than cover the monthly truck payment,” he added. “Equally impressive is the three-year/800,000-kilometre extended warranty and the half-a-million kilometre service package that Scania provides.”
The DC16 770 V8 integrates advanced engine management systems that optimise performance and economy. Features like precise fuel injection and turbocharging ensure the engine runs smoothly and efficiently, providing the necessary power when needed, while maintaining control over fuel consumption.
It’s an engine that’s well-suited to logging applications. The combination of high horsepower and torque means that the engine can handle the high-speed requirements of highway driving and the low-speed, high-power and torque demands of off-road logging. This versatility makes it an ideal choice for the varied conditions faced in the logging industry.
Jock has nothing but praise for high torque delivered at lower rpm, as it allows the vehicle to start smoothly and move heavy loads with ease.
“I like the low revving high torque performance of the 770 hp V8. It reminds me of my old V8 Superliner. The Scania motor likes working in the 1000-1400 rpm range; that’s the sweet spot. Anything over that, and you’re wasting fuel and time,” Jock explained.
“This is particularly beneficial for my logging job where I must navigate rough, uneven, and sometimes, like today, muddy and slippery conditions.”
The slick-shifting Scania GRSO926R Opticruise transmission seamlessly changes gear ratios, which makes it highly beneficial for forestry applications. It features a more efficient gear-shifting system that enhances fuel economy and provides smoother transitions, which are crucial for maintaining momentum on challenging terrain often encountered in logging.
The transmission’s durability and increased torque capacity are ideal for handling the heavy loads typical in logging operations.
Additionally, the Opticruise system includes automated clutch control and intelligent driving modes that adapt to varying conditions, improving overall vehicle performance and driver comfort. These features collectively lead to increased productivity, reduced wear and tear on the vehicle, and lower operational costs in logging applications.
For added safety, especially when navigating challenging terrain and steep downhill slopes, like descending the mountain from Tasmania’s Great Lakes region, the Scania R4100D retarder provides consistent and controlled braking power by utilising an auxiliary braking system that operates on hydraulic principles.
It is integrated into the vehicle’s transmission and functions by converting kinetic energy into heat, dissipating it through the truck’s cooling system. This process reduces the reliance on service brakes during prolonged or intense braking scenarios, such as descending steep inclines. By alleviating the load on the service brakes, the retarder extends the service brake lifespan and reduces the frequency of maintenance and replacement.
One of the key advantages of the Scania retarder is its ability to deliver continuous braking force without the risk of overheating. Traditional service brakes can overheat and lose effectiveness (a condition known as brake fade) during extended use, such as long downhill stretches.
The retarder, however, can maintain a steady braking force, preventing brake fade and ensuring consistent performance. This capability allows drivers like Jock to maintain a safer, more controlled descent, reducing the risk of accidents caused by runaway vehicles.
Moreover, the retarder’s braking power is adjustable, which allows Jock to tailor the level of braking force to match the specific demands of the descent. But unlike a Jake-Brake, you can still change gear when the retarder is engaged.
“If you want to know how well a truck performs, then take it on a test run up here,” Jock said. “In my other trucks, when you’re coming down the mountain, with the engine brake crackling, they struggle to hold the truck, even in lower gears, and we’re constantly forced to stand on the brake pedal to prevent engine overruns.
Furthermore, the road speed is much slower than the new Scania; sometimes, it can take 40 minutes longer to come down the mountain.”
The hub reduction design distributes the torque more evenly across the axle components. This reduces the strain on the central differential and other drivetrain parts, leading to longer service life and reduced maintenance needs.
The main advantage is that the input torque gets reduced twice, first in the differential centre and then through the planetary drive wheel ends. Another advantage, especially for logging trucks that operate in deeply rutted bush tracks, like Jock’s Scania, is the high ground clearance. In the case of the Scania, it has 322mm ground clearance at the diff centre.
The double reduction process means a smaller diameter crown wheel is required compared to a single reduction diff typically found on a highway truck.
Reduction gears in the hubs also increase the torque delivered to the wheels, providing superior traction on slippery, muddy or uneven surfaces. This is crucial in logging operations where vehicles frequently operate off-road and need reliable traction to avoid getting bogged down.
Scania’s Neil Wesley added that Jock had some very firm operating parameters for his new truck.
“He was adamant the new truck delivers high productivity in terms of trip times, but critically tare weight, reliability, durability, safety, and ground-clearance were important factors. The way the logging industry is structured here in Tasmania, you must keep your trucks on the road as long as possible, hauling as much as possible from the forest,” Neil said.
“We have a unique logging specification that includes essential safety features such as roll stability, ESP, EBS and built-in load scales, all of which help the drivers to do their jobs better and in greater safety. Scania’s logging spec truck is the ideal solution for forestry hauliers, like Jock, because of our Scandinavian logging expertise, plus our complete in-house engineering, our safety and, of course, V8 power, which means there is nothing better to do the job. Jock’s experience with the new V8 proves that.”
Impressed by his latest Scania R 770 V8, Jock revealed he’s now contemplating setting up another Scania log truck.
Once the injector tubes leak diesel into to the cooling system, your compressor fills your air system up with engine oil and your diff fails you will be able to plan a few more days off when your driveshaft splits apart at the weld, then pre book 2 weeks in Bali when it drops a liner or starts using 5 liters of oil every 1000kms. But atleast you made a magazine article before all of this, yay.